2020 Fontaine® Heavy Haul Xcalibur™ Extendable Platform Base

Information

2020 Fontaine® Heavy Haul Xcalibur™ Extendable Platform

Find out why more fleets and owner operators run with Fontaine® than ever before!

Features may include:
  • Adjust trailer length with ease – 48' model extends to 80' – 53' model extends to 90'
  • Your choice of tandem or tridem axles with spring or air suspension
  • Stop positions every 5' with air operated pins for greater convenience
  • Steel I-Beam crossmembers at 12" centers for greater strength
  • Structural steel siderails and steel front & rear skirt for heavy-duty performance
  • Uncompromising quality
  • Service-friendly design
  • Superior performance
  • Legendary durability
  • Highest resale value

Photos

Highlights

  • Dallas, Texas
  • 2020
  • Fontaine® Heavy Haul
  • Xcalibur™ Extendable Platform Base
  • Strongest main beam in the industry with minimum grade 80 flanges | High-tensile steel fabricated I-Beam on inner and outer beams for superior strength
  • Crossmembers: Single-piece, full-width steel crossmembers constructed of 4" x 3.19 lb I-Beams on 12" centers for superior strength and durability | Formed steel siderail braces engineered to provide maximum support | Siderails: 6" structural steel channel @ 6.5 lbs/ft | 3/16" steel stake pockets located on 24" centers | Rubrail: 2 1/2" rolled, formed rubrail with recess for conspicuity tape (meets NHTSA specs) | Pipe spools located between stake pockets
  • Available
  • 102"
  • Kingpin: 49"

Specifications

  • 2020
  • Fontaine® Heavy Haul
  • Xcalibur™ Extendable Platform
  • Base
  • Flatbed
  • Adjustable from 48' to 80'
  • Front deck length: 11' | Rear deck length: 37'
  • Kingpin: 49"
  • 24" from front
  • 102"
  • 80,000 lb distributed frame rating–self supporting, properly blocked (GAWR and tire ratings determine legal payloads)
  • Estimated: Air model: 17,244 lbs ± 3% | Spring model: 16,060 lbs ± 3%
  • Crossmembers: Single-piece, full-width steel crossmembers constructed of 4" x 3.19 lb I-Beams on 12" centers for superior strength and durability | Formed steel siderail braces engineered to provide maximum support | Siderails: 6" structural steel channel @ 6.5 lbs/ft | 3/16" steel stake pockets located on 24" centers | Rubrail: 2 1/2" rolled, formed rubrail with recess for conspicuity tape (meets NHTSA specs) | Pipe spools located between stake pockets
  • Strongest main beam in the industry with minimum grade 80 flanges | High-tensile steel fabricated I-Beam on inner and outer beams for superior strength
  • 2 heavy-duty axles with 49" spread (heavy-duty tridem axles available with 60 inch spread)
  • Sealed harness for maximum corrosion resistance
  • LED lights: 3 marker lights per side, 2 lights per side on rear with center marker lights
  • Hendrickson air ride on slide box, 60" adjustable | Hutch H-9700 3-leaf spring slider, 60" adjustable
  • 22.5 x 8.25 10-hole steel disc
  • 295/75R 22.5 14-ply radial
  • Hub-piloted 10-stud mount for increased capacity and durability | Outboard cast drums save time and cost on brake repairs
  • ABS wired to center pin of 7-way socket at front | 16 1/2" x 7" air operated
  • 2S/1M on tandem models (4S/2M on tridem models) | ABS wired to center pin of 7-way socket at front
  • Stop locations every 5 feet for greater versatility | 2 sets of rollers for smoother operation | Heavy-duty air operated pins for greater security and convenience | Air and electrical lines located inside the track provide better protection, reduce maintenance cost and improve operating efficiency
  • Flooring: 1 1/8" apitong or equivalent | 5/16" x 2" Torx screws, at each crossmember for maximum floor securement